Wear Resistance Motor Automatic Slide Door Operator
The main performance specification table
1. Model CA-3000 worm sliding door (single/double)
2. Type one-way horizontal open and two-way open
3. Door leaf weight 200 kg X 1 , 150 kg X 2 fan
4. DW door leaf width = 500 mm to 2500 mm per fan DW = 500 mm to 2500 mm per fan
5. According to the loading way according to the loading surface under the surface
6. Brushless DC motor DC 24 v, 75 w Worm motor
7. The controller of intelligent microcomputer processing controller
8. Power consumption 75 W
9. AC power supply voltage 80 v to 250 v
10. Ambient temperature - 20 ºC ~ + 50 ºC
11. Most noise 60 decibels
12. Open speed 600 mm/SEC 550 mm/SEC
13. Open the stop time can be adjusted to 20 seconds with 0.5 seconds left
14. The transmission elements 150 S8M toothed belt
15. Open the door by full/half open Can adjust the distance
16. External numerical control mode L - 138 special regulator
17. Push open power 3 kg
Features:
1. Can be directly connected infrared, construction is convenient, such as electric lock, UPS.
2. The large range of voltage stabilizing system, affordable AC80V ~ AC250V plus or minus 10% of the power input.
3. When they run into any obstacles or the human body, can immediately reverse, a substantial increase in users in and out of safety.
4. Add signal amplification device, make the door machine and matching, access control, attendance, and fire systems are more stable and safe.
5. The AD hoc fully open, half open (adjustable) function can adapt to different regions and different places of different switch range of traffic
Requirements, provide human nature to change more.
6. A power factor correction function, reduce unnecessary energy waste, to alert the user choose automatic door is installed
When set, generally do not consider the negligence of electricity consumption.
1. The large range of voltage stabilizing system (input voltage 80 v to 250 v gm)
2. Save electricity function (PFC) 95%
3. The silent multi-functional high resistance to low temperature
4. All series using toothed belt drive good, high stability
5. CE certification
Brushless DC motors
Features:
1. Internal control provide acoustic closed design, the motor running quiet, no noise.
2. Increase the torque improvement, make the motor can carry heavier, more stable operation.
3. The reducer adopts stainless steel casting, is by no means industrial plastic or made from cast iron, the host in a long uninterrupted high-speed operation
State, the more durability.
4. The drag reduction of driving wheel design, make the door leaf in the case of power failure, only 3 kg force can be manually opened, the old man and woman
Female, child all can do, greatly enhance the safety of automatic door.
Technical parameters:
Type |
Single-Winged |
Bi-parting |
|
Model |
CA-3000 |
CA-3000S |
|
Door Weight |
200kgX1(door) |
150kgx2(door) |
|
Door Width |
DW=700mm to 1500mm |
DW=650mm to 1350mm |
|
Installation |
Surface Install |
Surface Install |
|
Motor |
DC24V Brushless DC Motor |
DC24V Brushless DC Motor |
|
Controller |
The Micro-controller |
The Micro-controller |
|
Power Consumption |
75W |
75W |
|
Voltage |
AC80 to 250V (Regulate) |
AC80 to 250V (Regulate) |
|
Environmental Temperate |
-20'c to +50'c |
-20'c to +50'c |
|
Volume |
60decibel(max) |
60decibel(max) |
|
Starting Speed |
450mm/second to 750mm/second |
450mm/second to 750mm/second |
|
Starting Times |
Regulate from 0.5 second to 15 second |
Regulate from 0.5 second to 15 second |
|
Transmission |
Rack belt 150 S8M |
Rack belt 150 S8M |
|
Open door range : Full-open /Half-open(The distance can be regulated) |
Full-open /Half-open(The distance can be
regulated) |
PFC Power efficiency : 0.95 (AC100 Full load) |
0.95 (AC100 Full load) |
|
|
|
|
|
|
Pictures for Automatic Sliding Door Drive :
Audited Supplier 
){kind=link}
){kind=link}