Customization: | Available |
---|---|
Material: | Aluminum Alloy |
Type: | Sliding |
Still deciding? Get samples of US$ 260/Set
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Dual arms Automatic Swing Gate Motor Max.Weight Each Gate 300KGS
1. Open and close the gate by remote controls.
Auto closing when the gate is open. Time duration can be programmed from 0 to 99 s.
2. Auto stop when the running gate meet with resistance.
3. The force of motor can be programmed.
4. It is selectable to control 1 leaf or 2 leaves.
One pair electric fence gate opener includes: 2 swing gate openers, 2 remote control transmitters, 1 control box, 1 release key, photocell, alarm lamp, electric latch and Mounting accessories.The details plese refer to the following picture.
Suitable for rainy days and other harsh environment
The mode of single arm and double arm can be adjusted , which can realize the function of opening and closing a single door, or the function of opening and closing two doors at the same time.
Soft start and soft stop functions effectively reduce the impact on the door body when starting or stopping, lower noise and longer life.
New metal telescopic boom, adjustable opening Angle -- the maximum angle will open within 120 degree. Strong bearing capacity --
Simple, quick setup and usage Settings.
Technical Specification :
SD1108 Technical data: | |
Motor Power Supply | 24V DC |
Rated power | 80W |
Screw Drive Travel | 300mm |
Rod Speed | 1.6cm/speed |
Max. Leaf Width and Weight | 3m&300kg |
Max. Opening Angle | 110° |
Operating Ambient Temp | -20° - +55° |
Best quality hot sale automatic arm type swing gate opener Details
A. Photo cell
It can detect the tiny obstruction during gate closing or openning and make the gate open automatically. Avoiding people and gate opener from hurting. The valid detecting range of the photo cell is 10 meters.
B.Caution light
When the person force entering the house, the caution light will light and sound.
D. Electric latch
24V DC latch for additional safety of the gate. Release key to unlock the latch when power failure.
Sw1 and LED1 on the controller, A and B on the remote
SW1: leaening code
LED1: leaening code lamp
A: single-leaf open
B: double-leaf open
Please press Sw1(learning code) on the controller,
then press LED1(learning code lamp) will light on, then release the Sw1(learning code),then press any key on the remote.
If the LED1(learning code lamp) turn on again, which means you add the remote successfully. If no, which means you don't add the remote successfully.
Press Sw1 (learning code) about 10 seconds, during this 10 seconds. LED1(learning code) light on,then LED1(learning code lamp) will off.
Then release the Sw1(learning code, then LED1(learning code lamp) will off, which means, you erase the remote.